MMP-2
Mic Modeling Preamp
Gallery
MMP-2: Mic Modeling Preamp
Features
- 2-channel modeling preamp for recording and live performance
- Combines premium analog components and 24-bit/96kHz A/D conversion
- COSM Preamp Modeling for access to 9 classic and modern studio preamp sounds
- COSM Mic Modeling for a variety of high-end mic sounds
- Models are optimized for AKG C3000B, plus four additional mics
- Includes 4 bands of fully parametric EQ with 9 filter types, modeled tube compression, plus enhancer and de-esser
- Analog I/O includes 2 XLR/trs Mic inputs with Phantom Power and 2 XLR Line outputs
- Coaxial digital I/O and aes/ebu digital output for tight studio integration
- USB port allows PC control, plus ability to download new effect plug-ins
- Bundled software with intuitive graphic editing of EQ, compressors and more
The MMP-2 uses the same analog circuits of the mic preamps used in Roland’s VS-2480. In blind listening tests, these preamps were rated higher than much more expensive stand-alone models. How is this possible? To start, Roland carefully selected each of the analog components. Then, we designed a circuit that separates the analog, digital and power components, creating maximum warmth with minimal noise—a difference you can really hear.
COSM Mic Modeling and DSP Effects
At its basic level, the MMP-2 sounds great. But with the addition of 24-bit/96kHz A/D converters and DSP effects, this futuristic mic pre takes things to a whole new level. To start, there’s COSM technology to model the sound of vintage and high-end studio microphones. From there, you can tweak your sound with four bands of fully parametric EQ, modeled tube compression, enhancer and de-esser effects.
Wired for Today’s Studio
The desktop MMP-2 provides a variety of professional connections to handle just about any recording or live situation. On the top panel, you’ll find two balanced XLR/TRS Microphone inputs; there’s also two balanced XLR outputs on the back. And unlike other microphone preamps, you’ll also find a coaxial digital input, plus digital outputs in S/PDIF and AES/EBU formats—great for digital studios!
Open New Doors with USB
Why does the MMP-2 have a USB port? To use the bundled control software with your PC! Imagine drawing EQ curves or setting compressors using a sleek graphic interface. And that’s not all… In the future, Roland will provide new effects algorithms—such as a noise suppressor, hum canceller, feedback eliminator and modeled tape saturation—which can be downloaded into the MMP-2, allowing you to customize your preamp with the effects you use most.
Specs
- Analog Input
- Phantom Power
- DC 48V
- Max. Input Level
- + 2 dBu (PAD off), +22 dBu (PAD on)
- Nominal Input Level
- -64 dBu to +4 dBu
- Equivalent Input Noise
- -132 dBu (IHF-A typ.)
- Analog Output
- Nominal Output Level
- -16 dBu/+4 dBu
- Signal-to-Noise Ratio
- 105 dB (IHF-A typ.)
- Signal Processing
- AD Conversion
- 24-bit, 64 times oversampling
- DA Conversion
- 24-bit, 128 times oversampling
- Sample Rate
- 96.0/88.2/48.0/44.1kHz
- Frequency Response
- 96.0kHz: 20Hz to 40kHz (+0.1/-3.0 dB) 88.2kHz: 20Hz to
40kHz (+0.1/-3.0 dB) 48.0kHz: 20Hz to 20kHz (+0.1/-0.5 dB) 44.1kHz: 20Hz to 20kHz (+0.1/-0.5 dB) - Microphone Modeling
- Reference Microphone
- DR-20, Small Dynamic Microphone, Head-worn Dynamic Microphone, Miniature
Condenser Microphone, AKG C3000B, Flat - Modeling Microphone
- Small Dynamic, Vocal Dynamic, Large Dynamic, Small
Condenser, Large Condenser, Vintage Condenser, Flat - Equalizer
- 4-Band parametric equalizer
- Gain
- -15 dB to +15 dB
- Compressor
- Type
- Solid, Tube1, Tube2, Tube3, Tube4
- Knee Type
- Hard or Soft knee
- Other Effects
- Expander, Enhancer, De-esser, Pre-amp Modeling
- Display
- 20 characters, 2 lines (backlight LCD)
- Power Consumption
- 9W (AC 117/230/240 V)
- Accessories
- CD-ROM, AC Cord, USB Cable
- System Requirements
- Windows
- Operating System
- Microsoft Windows Me/98/98SE/2000 Professional
- Computer
- PCs equipped with USB connectors compatible with USB Specification Version 1.0 or later.
- CPU/Clock
- PentiumII 300MHz or higher
- Memory (RAM)
- 128MB or more
- Display/Colors
- 800 X 600 or more/65,536 colors (High Color 16-bit)
- Macintosh
- Operating System
- MacOS 8.6 or later (9.0 or later recommended)
- Computer
- Apple Macintosh series equipped with USB port as standard
- CPU/Clock
- PowerPC G3/233MHz or higher
- Memory (RAM)
- 128MB or more
- Size and Weight
- Width
- 250 mm
- 9-7/8 inches
- Depth
- 165 mm
- 6-1/2 inches
- Height
- 76 mm
- 3 inches
- Weight
- 1.8 kg
- 4 lbs.
- * This product was tested on ordinary computers and found to be compatible with the above. However, Roland cannot guarantee compatibility even if the above conditions are met due to the fact that the processing power of simular computers can differ due to design concepts or operating environments.
- *The specifications are subject to change without notice.
Downloads
Brochures & Catalogs
Updates & Drivers
- MMP-2 Editing Software (Windows XP)
- MMP-2 Editing Software (Mac OS-9)
- MMP-2 Driver Version 1.1.0 for Windows XP / Windows 2000
- This is the Roland MMP-2 driver for Microsoft(R) Windows(R) XP Home Edition/Professional and Microsoft(R) Windows(R) 2000 Professional.
Features:
- Multiclient support
- As many as four applications can simultaneously use each MIDI OUT/MIDI IN port. - MMP-2 Driver Version 1.1.0 for Windows 98 / Windows Me
- This is an Roland MMP-2 driver for Microsoft(R) Windows(R) 98 / Microsoft(R) Windows(R) Me.
Features:
- Multiclient support
- As many as four applications can simultaneously use each MIDI OUT/MIDI IN port. - MMP-2 USB Driver Macintosh OS X Version 1.20
- This is the latest driver for connecting the MMP-2 to a Macintosh computer running OS X. This version of the driver supports Intel based Macintosh computers.
- Clean-All USB Driver Utility
- This utility clears out all Roland USB Windows drivers and should be used if you are having difficulty installing your USB driver.
Note: You will have to reinstall the drivers for any other Roland device that is using a USB connection for Audio or MIDI.
Support
If you have questions about operating your Roland, BOSS or Cakewalk product, please check our Knowledge Base for answers to the most common questions.
You can also contact our Product Support department by phone or email.
In addition, we have a library of Owner’s Manuals and Support Documents that you can download and reference. If Support Documents are available for this product, they will be listed below.
Product Manuals
Support Documents
- MMP-2 TurboStart
- TurboStart for MMP-2
- An Introduction to Recording Your Own CD