Knowledge Base
G-600: Editing Arranger Tones
- Knowledge Base Id:
- 22603612
- Tags:
- g-600
by the Music Style tracks.
These user edits are saved in Performance memories for instant recall.
Use the following procedure to edit arranger tones:
1) Select the MUSIC STYLE you wish to edit.
2) Press TONE.
3) While holding SHIFT, press F2 [Arrng].
4) Use the PAGE [^ / v] buttons to select the track to be edited. (See "NOTE"
below).
5) Use the DRUMS/PART [^ / v] buttons to display "Prf."
6) While holding SHIFT, press F1 [Bank].
7) Use the DRUMS/PART [^ / v] buttons to select the Arranger Part to be
edited.
8) Use the ACCOMP/GROUP [^ / v] buttons to select the desired Tone group.
9) Use the BASS/BANK [^ / v] buttons to select the desired Tone bank.
10) Use the LOWER/NUMBER [^ / v] buttons to select the desired Tone.
11) Use the UPPER/VARIATION [^ / v] buttons to select the desired Tone
variation.
12) Repeat steps 3 - 11 to edit additional tracks.
NOTE: "ADR" = Arranger drums, "ABS" = Arranger bass, "AC1" = Accompaniment Part
1, etc.