Knowledge Base

JUNO-STAGE: Using a EV-5 Pedal to Control Leslie Speed

Knowledge Base Id:: 22610131
Tags:: juno-stage, control, ev-5, speed, pedal, leslie

1. Connect the EV-5 to the PEDAL CONTROL jack on the back panel of the JUNO-STAGE.

2. Press MENU and select "System," and then press ENTER.

3. With the System menu visible, select "KBD/CTRL," and then "PEDAL."

4. Turn the Value dial to select "CC01:MODULATION" below "Control Pedal Assign."

5. Press WRITE to save the new setting.

6. Press EXIT.