Knowledge Base

SPD-SX: Wave Manager Software not Communicating with the SPD-SX

Knowledge Base Id:: 22610591
Tags:: spd-sx, usb, problems, import

If you're able to load and preview files in the Wave Manager Software, but not able to transfer them to the SPD-SX, it's possible that the USB Mode in the SPD-SX is set incorrectly.
Confirm that the USB Mode is set to "WAVE MGR" with the following steps.

1. Press MENU.

2. Cursor to "SETUP" and then press ENTER.

3. Cursor down to "OPTION," and then press ENTER.

4. Press the (-) button to select "WAVE MGR."

5. Press EXIT when you're finished. The new setting is saved automatically.