Knowledge Base

FR-7xb: Assigning an Orchestra Sound to the FR-7xb Orchestral Bass Section

Knowledge Base Id:: 22611972
Tags:: fr-7xb

Use the following procedure to assign orchestral sounds to the orchestral bass section on your FR-7xb:

1. Select the SET and REGISTER you wish to edit.

2. If necessary, press the three ORCH BASS buttons to activate the orchestral bass section.

3. Press MENU.

4. Rotate the DATA knob to select menu #5 and press ENTER.

5. Rotate the DATA knob to select menu #5.1 and press ENTER.

6. Rotate the DATA knob to select the desire PATCH.

7. Press and hold the WRITE button to display the "WRITE" menu.

8. Press (but do NOT hold) the WRITE button to display "Executing Do Not Power Off."