Knowledge Base
MC-80: Inserting Bank and Program Changes
- Knowledge Base Id:
- 22617416
- Tags:
- mc-80
changes. These events can be inserted at any location into an existing track.
Use the following procedure to insert bank and program changes into a track:
1) Press F4 [MICRO].
2) Use the numbered buttons under TRACK to select a track.
3) Use the CURSOR buttons or the value DIAL to scroll to the desired position
in the track.
4) Press F1 [CREATE].
5) Use the CURSOR buttons or the value DIAL to select "Control Change."
6) Press F6 [EXECUTE].
7) Use the value DIAL to select "0 (Bank Select MSB)
8) Use the CURSOR buttons and the value DIAL to select a "Control Change
Value."
9) Press F1 [CREATE].
10) Use the CURSOR buttons or the value DIAL to select "Control Change."
11) Press F6 [EXECUTE].
12) Use the value DIAL to select "32 (Bank Select LSB)
13) Use the CURSOR buttons and the value DIAL to select a "Control Change
Value."
14) Press F6 [EXECUTE].
15) Use the CURSOR buttons and the value DIAL to select "Program Change."
16) Press F6 [EXECUTE].
17) Use the value DIAL to select a "Program Change Number."
18) Press F6 [EXECUTE].
19) Press EXIT twice to return to the main menu.