Knowledge Base

AX-7: Selecting Patches

Knowledge Base Id:: 22621957
Tags:: ax-7

The AX-7 has 128 patches in two banks, A11-88 and B11-88. These store controller and zone settings MIDI channels, program changes, etc. for quick recall. Use the following procedure to connect the AX-7 to a sound module and select patches:

1. Use a MIDI cable to connect the MIDI OUT of the AX-7 to the MIDI IN of a sound module.

2. Press the A/B button to select the desired bank and use the PATCH buttons to select Patches 11-88. (The patch numbers are labeled above the buttons.) For instance, to select Patch #15, press 1 followed by 5.

Note: You can use the PATCH DOWN/UP buttons on the neck to step through the patches sequentially.