Knowledge Base

GT-6: The Output Select

Knowledge Base Id:: 22624016
Tags:: gt-6

It's important to choose the appropriate Output Selection so it matches as close as possible to what the GT-6 is connected to. For example, if you have the GT-6 connected to a PA system, you would choose "LINE/(PA)." Use the following steps to set the Output Select:

1. Press OUTPUT SELECT so it's lit.

2. Turn the PATCH/VALUE dial to select the type of device connected to the GT-6 OUTPUT jack.

JC-120: When connected with a Roland JC-120 amp.

SMALL AMP: When connected with a small or "practice" guitar amp.

COMBO AMP: When connected to a Combo Amp.

STACK AMP: When connected to a Stack Amp.

COMBO AMP: When connected to a Combo Amp return.

STACK RETURN: When connected to the return on a stack amp.

LINE/PHONES: When connected to headphones, MIXER, or recording device.

LINE (PA). When connected to a Mixer, or PA system.

3. When finished, press EXIT.