Knowledge Base

HPD-10, Handsonic 10: Setting the Basic MIDI Channel

Knowledge Base Id:: 22625573
Tags:: hpd-10, handsonic, 10, control

Use the following steps to set the MIDI channel of the HPD-10.

1. Hold down the SHIFT button and press EDIT.

2. Press the CURSOR down button until "MIDI"
shows in the display.

3. Press CURSOR right until "MIDI CHANNEL"
shows on the display.

4. Press the + or - button to select the desired MIDI
channel-(OFF,1-16).

5. Press KIT when you're finished. The new setting is saved automatically.