Knowledge Base

RC-2: Phrase Delete

Knowledge Base Id:: 22625963
Tags:: rc-2, erase, remove

Use the following steps to delete a phrase in the RC-2:

1. Turn the PHRASE knob to choose the phrase you want to delete.

2. Turn the MODE knob to select "DELETE."
NOTE: Turning the MODE knob all the way counterclockwise selects the "WRITE" mode. Make sure that the "DELETE" mode is selected, which is one *notch* clockwise from the WRITE position.

3. Press the TAP SELECT/ENTER button. - The LED will flash yellow.

4. Press the TAP SELECT/ENTER button again. The phrase is now deleted.