Knowledge Base

SPD-SX: Assigning Waves to Pads

Knowledge Base Id:: 22626157
Tags:: spd-sx, sounds, samples

A sample in the SPD-SX is referred to as a “wave.” There are 210 waves built in. Here’s how to assign them to pads.

1. Select a kit to edit.

2. Press the MENU button.

3. Use the cursor arrow buttons to select PAD, and then press ENTER.

4. Press 5 to select WAVE.

5. Hit the pad you’d like to assign a wave to.

6. Press + or – to select the desired wave.

Tip: To scroll through waves quickly, hold down PAD CHECK•SHIFT while pressing + or – .

7. Repeat Steps 5 and 6 for the remaining pads.

8. Press EXIT twice when you’re finished—your new wave assignments are automatically saved in the kit.