Knowledge Base

BK-5: Creating a Layer on the BK-5

Knowledge Base Id:: 22626187
Tags:: bk-5, layer

Use the following procedure to layer a sound on the BK-5.

Note: Make sure that the SPLIT, LWR, and UP2 buttons aren't lit.

1. Press a TONE button so it lights to select the first sound.

2. Press the UP2 button so it lights to enable Layer mode.

3. Press a TONE button so it lights to select the second sound.

Note: You can even create a three-layer sound using the following steps.

4. Press the LWR button so it lights to enable the third layer.

5. Press a TONE button so it lights to select the third layered sound.