Knowledge Base

Using the Tuner on the Cube Amplifiers

Knowledge Base Id:: 22630306
Tags:: cube-80xl, cube-20x, cube-20xl, cube-40xl, cube-30x, cube-80x, micro, cube, rx, street, bass, cube-60xl, cube-120xl

Many of the Cube amplifiers have a built in tuner for convenient tuning of your guitar or instrument. Here's how to use the tuner:

Manual Tuning:

1. Press TUNER.

2. Turn the amp TYPE knob to select the string you'd like to tune.

3. Play an open string repeatedly and tune until the green indicator lights. If the left side red indicator lights up, the string is flat. If the right indicator lights, the string is too sharp.

4. Repeat Steps 2 and 3 to tune the remaining strings.

5. Press TUNER when you're finished.

Chromatic tuning:

1. Press and hold the TUNER button until it flashes.

2. Play one of the strings repeatedly and tune until the green indicator lights. If the left side red indicator lights up, the string is flat. If the right indicator lights, the string is too sharp.

3. Repeat Steps 2 and 3 to tune the remaining strings.

4. Press TUNER when you're finished.