Knowledge Base

GT-8: The Output Select

Knowledge Base Id:: 22636508
Tags:: gt-8, sound

It's important to choose the appropriate Output Selection so it matches as close as possible to what the GT-8 is connected to. For example, if you have the GT-8 connected to a PA system, you would choose "LINE/PHONES". Use the following steps to set the Output Select:

1. Press OUTPUT SELECT so it's lit.

2. Turn the PATCH/VALUE dial to select the type of device connected to the GT-8:

JC-120: When connected with a Roland JC-120 amp.

SMALL AMP: When connected with small or "practice" guitar amp.

COMBO AMP: When connected to a Combo Amp.

STACK AMP: When connected to a Stack Amp.

JC-120 RETURN: When connected to the return on a JC-120.

STACK RETURN: When connected to the return on a stack amp.

LINE/PHONES: When connected to headphones, PA, MIXER, or recording device.

3. When finished, press EXIT.