Knowledge Base

R-26: Selecting an Input Source for USB Audio

Knowledge Base Id:
22923291
Tags:
r-26, handheld, loop, back, loopback, loop-back, interface, usb, computer

Incoming audio in the R-26 can also be recorded via USB into software on your computer. To select an input source for the Audio Interface and Loop Back functions of the R-26:

  1. Press MENU. 
  2. Select "AUDIO I/F". 
  3. Select "INPUT DEVICE". 
  4. Select the input that you would like to use: 

    INTERNAL: Selects the internal mics (a mix of the directional internal mics and the omnidirectional internal mics). 
    ANALOG: Selects the input from the ANALOG IN 1/L jack and ANALOG IN 2/R jack. Recording will take place in stereo. 
    ANALOG (MONO): Selects the input from the ANALOG IN 1/L jack and ANALOG IN 2/R jack. Two mono channels will be recorded. 
    PLUG-IN: Selects the input from the PLUG IN MIC jack.